​Linear DT, DTC, DTD: Remote Control Transmitter By Linear 310MHz
$39.00
$45.00
One Button Remote, Moore O Matic compatible 8 dip switches, with two positions to set the code Activates one receiver or gate Test/operate red LED Frequency: 310 MHz, Codes: 256 (set by dip switches) Dimensions: 2.16 x .95 x 3.75 inches Same as DT (Same as DTC ,DTD and Frequency A) Visor clip included, Additional Visor Clips 9 volt battery included, Additional Batteries Model DNT00002A Programing directions included

​

​Linear DT-2A, DT-2D: Remote Control Transmitter By Linear 310MHz
$39.00
$45.00
Two Button Remote, Moore O Matic compatible 8 dip switches, with two positions to set the code Activates one receiver or gate Test/operate red LED Frequency: 310 MHz, Codes: 256 (set by dip switches) Dimensions: 2.16 x .95 x 3.75 inches Same as DT-2 Visor clip included, Additional Visor Clips 9 volt battery included, Additional Batteries Model DNT00017A Programing directions included.

​

​Linear DT-4A, DT4A, DT4B: Remote Control Transmitter By Linear 310MH
$45.00
$55.00
Four button remote control, Moore O Matic compatible 8 dip switches, with two positions to set the code Activates four receivers or combo of door and gate receivers Can also be used as remote UP, DOWN, and STOP control for commercial operators Test/operate red LED Frequency: 310 MHz, Codes: 256 (set by dip switches) Dimensions: 2.16 x .95 x 3.75 inches Same as DT4A, DT4B Visor clip included, Additional Visor Clips 9 volt battery included, Additional Batteries Model DNT00027B Programing directions included

​

​Linear DT3+1: Common Gate Remote Control Transmitter By Linear 310MHz
$49.00
$55.00
Four Button Remote Control Transmitter The DT3+1 4-channel Common Gate Access Transmitter is a hand-held four-button remote Three-channel section plus an individual one-channel section. It is designed so that channel 1 may have a system code independent of the other three channels. Remote operates in conjuction with four single-channel receivers Or one multi-channel receiver, can perform a variety of remote switching tasks. 8 dip switches, with two positions to set the code Activates one receiver or gate Test/operate red LED Frequency: 310 MHz, Codes: 256 (set by dip switches) Dimensions: 2.16 x .95 x 3.75 inches Visor clip included, Additional Visor Clips 9 volt battery included, Additional Batteries Model DNT00027A Programing directions included.

​​

Linear Mega Code MCT-3 Garage Door Remote Control - Mega-Code
$39.00
$45.00
Mega Code Three Button garage door opener / operator remote control radio transmitter - Model MCT-3 Two Channel.

​

​Linear Act-34B 4-Channel Keychain Transmitter
$39.00
$46.00
Compatible with 318 MHz Linear access receivers and controllers Factory programmed Mega Code format supports over 1,000,000 codes When used with Linear access controller, transmitters can be locally/remotely programmed into memory Two type 2016 lithium batteries supplied; 1.25" W x 2.25" H x 0.48" D Supplied with quick-disconnect key ring.

​

​Linear 3089 300 MHz One-Button Visor Remote
$35.00
$45.00
Compatible with U.S. Multicode gate/garage door openers by Linear Replaces Multicode model 1089 300MHz 10 Dip Switch Remotes and Multi Elmac 3089 300 mhz frequency -10 (binary) dip switches Not Universal Remote-NOT COMPATIBLE WITH LIFTMATER, SEARS, GENIE, WAYNE DALTON, CHAMBERLAIN OPENERS 3089 Remote Includes: Remote, Visor Clip, Battery, Instructions.

​

Multicode 4120 - 300 MHz 2 Button Remote Control
$29.00
$45.00
Garage door opener 2 button hand held remote control 300 MHz Frequency Two (2) sets of 10 Dip Switches This item will operate up to two (2) gate or garage doors Compatible with all US Multicode gate or garage door opener systems.